SPT-130W Co2 Laser Power Supply

SPT-130W Co2 Laser Power Supply

 

130W Co2 Laser Power Supply

Mode

SPT-130W

Input voltage

AC 220/110V

Response speed

≤1mS

Max output current

38mA

Starter voltage

40KV

Nominal power

625W

Output voltage

40KV

Working voltage

30KV

Output current

8-36mA

Using condition

Temperature

-10~40

Humidity

≤85%

 

Power supply aging test: each laser power supply will be tested by full load condition under high temperature 60 degrees for 12 hours for aging test. Every 7 seconds to open, stop the power test for 500 times.

 

SPT-130W

* Adoption of zero-current soft-switching half-bridge circuit makes power supply have high working efficiency, fast response features, and is easy to work with laser tube

* Port controls simple, adapt to the high and low level two signals, using TTL can control the laser and, at the same time, stop with abnormal protection switch, testing outside water supply, ventilation, etc.

* Laser power regulation can input 0 to 5v analog signals, also can input PWM signal to control the output of the laser power.

* Power supply with open circuit protection function: in the case of good grounding protection, power supply can work for short time in open state, so that we can avoid the laser supply damage caused by laser tube burst.

 

Related Search

  • laser power supply
  • power supply
  • co2 laser source
  • laser power
  • laser power supply supplier
  • laser power supply seller
  • laser box supplier
  • laser box seller
  • laser source supplier
  • laser source seller